Other

64-73 Mustang Other
Displaying 1 to 93 (of 93 products) Result Pages:  1 
 Product Name   Price 
 

1964-65 5-Speed Conversion Kit - For Use With Original 5-Bolt Bell Housing

5-Speed Conversion Kit - For Use With Original 5-Bolt Bell Housing.  Kit includes (1) adapter plate kit, (1) cross member bar, (1) transmission insulator and (1) slip yoke. Note: Adapter plate requires 2 holes drilled into the bell housing.
 
878.15
 

1964-66 Deluxe Sequential Tail Light Kit

1964-1966 - Deluxe Sequential Tail Light Kit.  Receive the best of today's technology while retaining the classic look of your Mustang, with these LED Sequential taillight kits. The LED lamps are 3 to 4X brighter than stock OEM bulbs. The LED bulbs run much cooler than the standard incandescent bulb, so they will not melt your stock lens. The sequential pattern will only run when the turn signal is on, and not run during normal braking. Included in these kits are (2) taillight modules, (1) flasher module & complete illustrated installation instructions. These kits are an excellent upgrade in looks as well as function.

 
273.00
 

1964-66 Electric Trunk Release Kit

1964-1966 - Electric Trunk Release Kit.  The remote trunk release is now electric! Chrome release lever, mounting hardware and connectors included. High quality & easy installation.
 
199.55
 

1964-66 L.E.D Tail Lamps

1964-1966 - L.E.D Tail Lamps.  NOW AVAILABLE FOR 1964-1969! NO MORE DIM TAIL LAMPS! Brighter than the original bulb lamps, these L.E.D. tail lamps are 21st Century technology for your classic mustang! Complete set ready to convert both tail lamps. Lens, bezels and gaskets are available separately. New Improvements: Four Wire Connection. A four (4) wire connection with a dedicated turn signal wire included. The onboard micro-controller will determine whether to flash the turn signal or not based on the particular situation (ie. Brake on or off). Use of the fourth wire is optional depending on the vehicle. This is important only for customers with an aftermarket wiring harness. RapidFireT. The brake lights are equipped with our new RapidFireT brake light system. Every time the brakes are used the tail lamps flash three times in rapid succession followed by a constant on. This cycle is repeated every time the brakes are used. valuable safety feature that helps ensure the car’s visibility and intent to stop to other drivers. This function can also be disabled.
 
199.55
 

1964-66 Rear Lowering Kits By TMC - 1" Drop

1964-1966 - Rear Lowering Kits By TMC - 1" Drop.  These lowering kits are sturdy cast aluminum blocks with longer, stronger u-bolts. Also comes with nylock nuts and instructions. Fast and easy lowering for your Mustang or Falcon.
 
75.40
 

1964-66 Traction Bar Kits - Pair

1964-1966 - Traction Bar Kits - Pair.  Stops axle windup for faster acceleration and shorter stoping distances. Made from identical tooling for Ford & Shelby. Authentic M-1 cast tube ends and bard & brackets are powder-coated for corrosion resistance. Under axle design. Above photo is for reference only and actual product may vary slightly from photo.
 
199.55
 

1964-66 Underhood Stainless Steel Dress-Up Kit

1964-1966 - Underhood Stainless Steel Dress-Up Kit.  This kit will help complete the look of your engine compartment. Panels are #8 polished stainless steel and include cut outs for hood bumpers and slotted bolt holes for fender adjustments. Kit also includes stainless steel button head allen screws with washers and nylock nuts, 4 new hood to fender bumpers and installation instructions.
 
632.45
 

1965 Shelby Style Rear Seat Replacement Panels - Saves Approximately 80 Lbs, Reproduction

Shelby Style Rear Seat Replacement Panels - Saves Approximately 80 Lbs, Reproduction.  Shelby style, fiberglass rear seat replacement panel originally used on the 1965-66 Shelby. Note: All fiberglass parts require special preparation and fitting. In some cases modification to fiberglass parts may be required. Fiberglass parts are sold “AS IS” with no guarantees against cracking, warping or poor fit. Purchaser assumes all responsibilities for correct installation. No returns are accepted on special order fiberglass parts.
 
603.20
 

1965-66 1" Drop Coil Springs

1" Drop Coil Springs.  These American made black powder-coated 620 coil springs provide firmer springs with a 1" lower suspension than your stock mustang and greatly improves handling. Sold in pairs. Above photo is for reference only.
 
205.40
 

1965-66 5-Speed Conversion Kit - Use With Original 6-Bolt Bell Housing

5-Speed Conversion Kit - Use With Original 6-Bolt Bell Housing.  Kit includes (1) adapter plate kit, (1) cross member bar, (1) transmission insulator and (1) slip yoke. Note: Adapter plate requires 1 hole drilled and 1 hole drilled & tapped into the bell housing.
 
973.70
 

1965-66 5-Speed Conversion Kit - V8, Use With T5 Late Model Bell Housing

5-Speed Conversion Kit - V8, Use With T5 Late Model Bell Housing.  Kit includes (1) fulcrum & spacer kit, (1) cross member bar, (1) transmission insulator and (1) slip yoke. Note: Modification is required to T5 bell housing for fulcrum kit.
 
676.65
 

1965-66 Billet Aluminium Tail Lamp Bezels

Billet Aluminium Tail Lamp Bezels.  Billet Aluminum bezels are a great way to give your Mustang a unique look. Solid billet machined with accent lines and hex head screws give your Mustang that distinctive appearance. Sold in pairs.
 
335.40
 

1965-66 Billet Hood Hinge Kit - For Fiberglass Hood

Billet Hood Hinge Kit - For Fiberglass Hood.  Billet Aluminum hood hinges are the perfect addition to your resto-mod Mustang. Made from billet aluminum for high strength and a incredible visual look.
 
1,372.80
 

1965-66 Billet Hood Hinge Kit - For Steel Hood

Billet Hood Hinge Kit - For Steel Hood.  Billet Aluminum hood hinges are the perfect addition to your resto-mod Mustang. Made from billet aluminum for high strength and a incredible visual look.
 
1,372.80
 

1965-66 Exhuast Kits - 6 Cylinder Single Exhaust

Exhuast Kits - 6 Cylinder Single Exhaust.  These American-made Walker® components are the finest quality replacements available. Our NEW “SUPER TURBO” kit includes Walker “Super Turbo” low restriction mufflers for a noticeable performance improvement. All other kits feature OEM style replacement pieces. Walker components are designed for “bolt-on” driveway installations; no welding, fabricating or bending! Kits include H-pipe (or head pipe), exhaust pipes, tail pipes, muffers, tips (non-GT), clamps and hangers. Gain performance and Economy!
 
438.10
 

1965-66 Exhuast Kits - V8 Single Exhaust

Exhuast Kits - V8 Single Exhaust.  These American-made Walker® components are the finest quality replacements available. Our NEW “SUPER TURBO” kit includes Walker “Super Turbo” low restriction mufflers for a noticeable performance improvement. All other kits feature OEM style replacement pieces. Walker components are designed for “bolt-on” driveway installations; no welding, fabricating or bending! Kits include H-pipe (or head pipe), exhaust pipes, tail pipes, muffers, tips (non-GT), clamps and hangers. Gain performance and Economy!
 
559.00
 

1965-66 Rack & Pinion Conversion Kits - With 6 Cylinder

Rack & Pinion Conversion Kits - With 6 Cylinder.  By Flaming River. Complete bolt-on kit uses original suspension. Includes tilt steering column for use with either Ford steering wheel or aftermarket. Power steering cars must remove pump, control valve ram, etc. Power assist not needed. Free shipping does not apply to this part.
 
2,481.70
 

1965-66 Steering Gear Boxes - Long Shaft, 16:1 Ratio, 1" Sector

Steering Gear Boxes - Long Shaft, 16:1 Ratio, 1" Sector.  All new, not rebuilt. Direct bolt-in replacement, smooth needle bearing design. 1 year factory warranty.
 
1,097.85
 

1965-66 Steering Gear Boxes - Long Shaft, 16:1 Ratio, 1-1/8" Sector

Steering Gear Boxes - Long Shaft, 16:1 Ratio, 1-1/8" Sector.  All new, not rebuilt. Direct bolt-in replacement, smooth needle bearing design. 1 year factory warranty.
 
1,149.20
 

1965-66 Steering Gear Boxes - Short Shaft, 19:1 Ratio, 1" Sector

Steering Gear Boxes - Short Shaft, 19:1 Ratio, 1" Sector.  All new, not rebuilt. Direct bolt-in replacement, smooth needle bearing design. 1 year factory warranty.
 
1,097.85
 

1965-66 T5 Crossmember & Insulator

T5 Crossmember & Insulator.  Crossmembers feature Tig welded construction with new mounting hardware and removable parking brake bracket. Black powder-coated finish. Insulators fit T5 and Tremec Crossmember bars.
 
319.15
 

1965-66 Tilit Steering Columns - Paint To Match

Tilit Steering Columns - Paint To Match.  These are available in stainless steel or paintable steel and can be used with original or aftermarket steering wheels. For aftermarket wheels use 3601 hub kit.
 
854.10
 

1965-66 Tilit Steering Columns - Stainless Steel

Tilit Steering Columns - Stainless Steel.  These are available in stainless steel or paintable steel and can be used with original or aftermarket steering wheels. For aftermarket wheels use 3601 hub kit.
 
1,197.30
 

1965-68 Exhuast Kits - V8 'Super Turbo' Dual Exhaust

1965-1968 - Exhuast Kits - V8 'Super Turbo' Dual Exhaust.  These American-made Walker® components are the finest quality replacements available. Our NEW “SUPER TURBO” kit includes Walker “Super Turbo” low restriction mufflers for a noticeable performance improvement. All other kits feature OEM style replacement pieces. Walker components are designed for “bolt-on” driveway installations; no welding, fabricating or bending! Kits include H-pipe (or head pipe), exhaust pipes, tail pipes, muffers, tips (non-GT), clamps and hangers. Gain performance and Economy!
 
598.00
 

1965-68 T5 Clutch Cable Conversion Kit

1965-1968 - T5 Clutch Cable Conversion Kit.  Kit works with T5, T45, T56 & Tremec transmissions. No drilling of firewall required. NOTE: Will work with 1969-70 models but requires some fabrication.
 
590.20
 

1965-70 LED Back Up Lamp Bulb - White

- LED Back Up Lamp Bulb - White.  Update the back up lamp bulbs on your with LED replacement bulbs. Fits in the standard 1142 lamp socket; just plug the new bulbs and go! You will notice a brighter white illumination immediately after installation. Two bulbs required per car.
 
35.10
 

1965-70 Rack & Pinion Conversion Kits - With Granada Spindles

- Rack & Pinion Conversion Kits - With Granada Spindles.  By Flaming River. Complete bolt-on kit uses original suspension. Includes tilt steering column for use with either Ford steering wheel or aftermarket. Power steering cars must remove pump, control valve ram, etc. Power assist not needed. Free shipping does not apply to this part.
 
3,697.20
 

1965-70 Rack & Pinion Conversion Kits - With V8

- Rack & Pinion Conversion Kits - With V8.  By Flaming River. Complete bolt-on kit uses original suspension. Includes tilt steering column for use with either Ford steering wheel or aftermarket. Power steering cars must remove pump, control valve ram, etc. Power assist not needed. Free shipping does not apply to this part.
 
3,697.20
 

1965-70 T5 Crossmember & Insulator - Fits 1965-70 T5 & Tremec Crossmembers, Sold Individually.

- T5 Crossmember & Insulator - Fits 1965-1970 T5 & Tremec Crossmembers, Sold Individually..  Crossmembers feature Tig welded construction with new mounting hardware and removable parking brake bracket. Black powder-coated finish. Insulators fit T5 and Tremec Crossmember bars.
 
60.45
 

1965-73 LED Turn Signal Lamp Bulb - Amber

1965-1973 - LED Turn Signal Lamp Bulb - Amber.  Update your front parking turn signal lamps with this ultra bright LED replacement bulb. Two bulbs required per car. Just plug the new bulbs and go. You will notice a brighter illumination immediately after installation. Fits1965-73 Mustang.
 
22.10
 

1966 CYL T-5 Conversion Kit - For Use With Orignal 6-Bolt Bell Housing

CYL T-5 Conversion Kit - For Use With Orignal 6-Bolt Bell Housing.  Kit includes (1) adapter plate, (1) crossmember bar, (1) trans insulator, and (1) slip yoke.
 
892.45
 

1966 Shelby Style Rear Seat Replacement Panels - Saves Approximately 80 Lbs, Reproduction

Shelby Style Rear Seat Replacement Panels - Saves Approximately 80 Lbs, Reproduction.  Shelby style, fiberglass rear seat replacement panel originally used on the 1965-66 Shelby. Note: All fiberglass parts require special preparation and fitting. In some cases modification to fiberglass parts may be required. Fiberglass parts are sold “AS IS” with no guarantees against cracking, warping or poor fit. Purchaser assumes all responsibilities for correct installation. No returns are accepted on special order fiberglass parts.
 
553.80
 

1967-68 Deluxe Sequential Tail Light Kit

- Deluxe Sequential Tail Light Kit.  Receive the best of today's technology while retaining the classic look of your Mustang, with these LED Sequential taillight kits. The LED lamps are 3 to 4X brighter than stock OEM bulbs. The LED bulbs run much cooler than the standard incandescent bulb, so they will not melt your stock lens. The sequential pattern will only run when the turn signal is on, and not run during normal braking. Included in these kits are (2) taillight modules, (1) flasher module & complete illustrated installation instructions. These kits are an excellent upgrade in looks as well as function.

 
273.00
 

1967-68 L.E.D Tail Lamps

- L.E.D Tail Lamps.  NOW AVAILABLE FOR 1964-1969! NO MORE DIM TAIL LAMPS! Brighter than the original bulb lamps, these L.E.D. tail lamps are 21st Century technology for your classic mustang! Complete set ready to convert both tail lamps. Lens, bezels and gaskets are available separately. New Improvements: Four Wire Connection. A four (4) wire connection with a dedicated turn signal wire included. The onboard micro-controller will determine whether to flash the turn signal or not based on the particular situation (ie. Brake on or off). Use of the fourth wire is optional depending on the vehicle. This is important only for customers with an aftermarket wiring harness. RapidFireT. The brake lights are equipped with our new RapidFireT brake light system. Every time the brakes are used the tail lamps flash three times in rapid succession followed by a constant on. This cycle is repeated every time the brakes are used. valuable safety feature that helps ensure the car’s visibility and intent to stop to other drivers. This function can also be disabled.
 
228.80
 

1967-68 Underhood Stainless Steel Dress-Up Kit

- Underhood Stainless Steel Dress-Up Kit.  This kit will help complete the look of your engine compartment. Panels are #8 polished stainless steel and include cut outs for hood bumpers and slotted bolt holes for fender adjustments. Kit also includes stainless steel button head allen screws with washers and nylock nuts, 4 new hood to fender bumpers and installation instructions.
 
632.45
 

1967-70 5-Speed Conversion Kit - Use With Original Bell Housing

- 5-Speed Conversion Kit - Use With Original Bell Housing.  Kit includes (1) adapter plate kit, (1) cross member bar, (1) transmission insulator and (1) slip yoke. Note: Adapter plate requires modification to the bell housing.
 
856.05
 

1967-70 5-Speed Conversion Kit - Use With T5 Late Model Bell Housing

- 5-Speed Conversion Kit - Use With T5 Late Model Bell Housing.  Kit includes (1) fulcrum kit, (1) cross member bar, (1) transmission insulator and (1) slip yoke.
 
661.70
 

1967-70 Billet Hood Hinge Kit - For Fiberglass Hood

- Billet Hood Hinge Kit - For Fiberglass Hood.  Billet Aluminum hood hinges are the perfect addition to your resto-mod Mustang. Made from billet aluminum for high strength and a incredible visual look.
 
1,372.80
 

1967-70 Billet Hood Hinge Kit - For Steel Hood

- Billet Hood Hinge Kit - For Steel Hood.  Billet Aluminum hood hinges are the perfect addition to your resto-mod Mustang. Made from billet aluminum for high strength and a incredible visual look.
 
1,372.80
 

1967-70 Electric Trunk Release Kit

- Electric Trunk Release Kit.  The remote trunk release is now electric! Chrome release lever, mounting hardware and connectors included. High quality & easy installation.
 
198.25
 

1967-70 Steering Gear Boxes - Short Shaft, 16:1 Ratio, 1-1/8" Sector

- Steering Gear Boxes - Short Shaft, 16:1 Ratio, 1-1/8" Sector.  All new, not rebuilt. Direct bolt-in replacement, smooth needle bearing design. 1 year factory warranty.
 
914.55
 

1967-70 T5 Crossmember & Insulator

- T5 Crossmember & Insulator.  Crossmembers feature Tig welded construction with new mounting hardware and removable parking brake bracket. Black powder-coated finish. Insulators fit T5 and Tremec Crossmember bars.
 
319.15
 

1967-70 Tilit Steering Columns - Paint To Match

- Tilit Steering Columns - Paint To Match.  These are available in stainless steel or paintable steel and can be used with original or aftermarket steering wheels. For aftermarket wheels use 3601 hub kit.
 
896.35
 

1967-70 Tilit Steering Columns - Stainless Steel

- Tilit Steering Columns - Stainless Steel.  These are available in stainless steel or paintable steel and can be used with original or aftermarket steering wheels. For aftermarket wheels use 3601 hub kit.
 
1,197.30
 

1967-70 Traction Bar Kits - Pair

- Traction Bar Kits - Pair.  Stops axle windup for faster acceleration and shorter stoping distances. Made from identical tooling for Ford & Shelby. Authentic M-1 cast tube ends and bard & brackets are powder-coated for corrosion resistance. Under axle design. Above photo is for reference only and actual product may vary slightly from photo.
 
199.55
 

1967-73 1" Drop Coil Springs

1967-1973 - 1" Drop Coil Springs.  These American made black powder-coated 620 coil springs provide firmer springs with a 1" lower suspension than your stock mustang and greatly improves handling. Sold in pairs. Above photo is for reference only.
 
205.40
 

1967-73 Rear Lowering Kits By TMC - 1" Drop

1967-1973 - Rear Lowering Kits By TMC - 1" Drop.  These lowering kits are sturdy cast aluminum blocks with longer, stronger u-bolts. Also comes with nylock nuts and instructions. Fast and easy lowering for your Mustang or Falcon.
 
82.55
 

1969 Deluxe Sequential Tail Light Kit

1969 - Deluxe Sequential Tail Light Kit.  Receive the best of today's technology while retaining the classic look of your Mustang, with these LED Sequential taillight kits. The LED lamps are 3 to 4X brighter than stock OEM bulbs. The LED bulbs run much cooler than the standard incandescent bulb, so they will not melt your stock lens. The sequential pattern will only run when the turn signal is on, and not run during normal braking. Included in these kits are (2) taillight modules, (1) flasher module & complete illustrated installation instructions. These kits are an excellent upgrade in looks as well as function.

 
273.00
 

1969 L.E.D Tail Lamps

1969 - L.E.D Tail Lamps.  NOW AVAILABLE FOR 1964-1969! NO MORE DIM TAIL LAMPS! Brighter than the original bulb lamps, these L.E.D. tail lamps are 21st Century technology for your classic mustang! Complete set ready to convert both tail lamps. Lens, bezels and gaskets are available separately. New Improvements: Four Wire Connection. A four (4) wire connection with a dedicated turn signal wire included. The onboard micro-controller will determine whether to flash the turn signal or not based on the particular situation (ie. Brake on or off). Use of the fourth wire is optional depending on the vehicle. This is important only for customers with an aftermarket wiring harness. RapidFireT. The brake lights are equipped with our new RapidFireT brake light system. Every time the brakes are used the tail lamps flash three times in rapid succession followed by a constant on. This cycle is repeated every time the brakes are used. valuable safety feature that helps ensure the car’s visibility and intent to stop to other drivers. This function can also be disabled.
 
218.40
 

1969-70 Underhood Stainless Steel Dress-Up Kit

19679-1970 - Underhood Stainless Steel Dress-Up Kit.  This kit will help complete the look of your engine compartment. Panels are #8 polished stainless steel and include cut outs for hood bumpers and slotted bolt holes for fender adjustments. Kit also includes stainless steel button head allen screws with washers and nylock nuts, 4 new hood to fender bumpers and installation instructions.
 
632.45
 

1970 Deluxe Sequential Tail Light Kit

1970 - Deluxe Sequential Tail Light Kit.  Receive the best of today's technology while retaining the classic look of your Mustang, with these LED Sequential taillight kits. The LED lamps are 3 to 4X brighter than stock OEM bulbs. The LED bulbs run much cooler than the standard incandescent bulb, so they will not melt your stock lens. The sequential pattern will only run when the turn signal is on, and not run during normal braking. Included in these kits are (2) taillight modules, (1) flasher module & complete illustrated installation instructions. These kits are an excellent upgrade in looks as well as function.

 
273.00
 

1/4" Bolt-20 Thread x .75" Long Stainless Steel Bolt

- 1/4" Bolt-20 Thread x .75" Long Stainless Steel Bolt.  Continue to set your Mustang apart from all the rest by paying attention to the smallest detail of your under hood dress up with these stainless steel bolts. Available sizes 5/16, 1/4, & 3/8. Bolts feature Allen head fastening with custom designed washer. Individually packaged so you can order just what you need.
 
14.95
 

3/8" Bolt-16 Thread x 1.25" Long Stainless Steel Bolt

- 3/8" Bolt-16 Thread x 1.25" Long Stainless Steel Bolt.  Continue to set your Mustang apart from all the rest by paying attention to the smallest detail of your under hood dress up with these stainless steel bolts. Available sizes 5/16, 1/4, & 3/8. Bolts feature Allen head fastening with custom designed washer. Individually packaged so you can order just what you need.
 
14.95
 

5/16" Bolt-18 Thread x 1.0" Long Stainless Steel Bolt

- 5/16" Bolt-18 Thread x 1.0" Long Stainless Steel Bolt.  Continue to set your Mustang apart from all the rest by paying attention to the smallest detail of your under hood dress up with these stainless steel bolts. Available sizes 5/16, 1/4, & 3/8. Bolts feature Allen head fastening with custom designed washer. Individually packaged so you can order just what you need.
 
14.95
 

7 Colour Tachometer

- 7 Colour Tachometer.  7 colour lighted universal tachometer.
 
181.35
 

Billet Shift Boot Ring & Handbrake Ring - Handbrake Ring

- Billet Shift Boot Ring & Handbrake Ring - Handbrake Ring.  These universal application rings are a nice way to add a custom touch to your Mustang. Hand brake ring works with our custom hand brake assembly #7000F.
 
106.60
 

Billet Shift Boot Ring & Handbrake Ring - Shift Ring

- Billet Shift Boot Ring & Handbrake Ring - Shift Ring.  These universal application rings are a nice way to add a custom touch to your Mustang. Hand brake ring works with our custom hand brake assembly #7000F.
 
107.90
 

Custom Aluminium Valve Covers - Ball Milled, With Hole

- Custom Aluminium Valve Covers - Ball Milled, With Hole.  These polished aluminum valve covers fit Ford 289, 302, 351W and 5.0L talls with 3-13/16" tall holes. Sold in pairs.
 
181.35
 

Custom Aluminium Valve Covers - Plain, With Hole (Not Pictured)

- Custom Aluminium Valve Covers - Plain, With Hole (Not Pictured).  These polished aluminum valve covers fit Ford 289, 302, 351W and 5.0L talls with 3-13/16" tall holes. Sold in pairs.
 
181.35
 

Custom Handbrake

- Custom Handbrake.  Add the great looks and performance of a hand brake to your Mustang. Mounts to any flat surface of cars floorboard. Requires customer to fabricate attachment cables depending on where it is mounted. Use with Billet hand brake ring #70BHR and brake boot #7000F.
 
302.25
 

Custom Shift Kit For C4 Automatics

- Custom Shift Kit For C4 Automatics.  This kit comes complete with everything you need from linkage to shift knob. Fits with standard consoles and shifter bezels. Or buy one of our custom boots and trim rings to give your car a hot rod style all your own.
 
585.00
 

Driving Lights - High Power Driving Lights

- Driving Lights - High Power Driving Lights.  See and be seen with these universal driving lights. Complete with mounting brackets, switch and wiring.
 
87.75
 

Engine Turned Glove Box Door Insert Panel

- Engine Turned Glove Box Door Insert Panel.  This adhesive-backed stainless steel panel installs easily on your 65GT or 1965-66 Deluxe glove box door. Designed to complement our “Vintage Instrument Bezel”, part number 10838Y or 10838X. Note: will not fit the “curved” 1964-66 standard glove box door.
 
232.70
 

Euro Style Side Markers - Smoke

- Euro Style Side Markers - Smoke.  Add smoke euro style side marker lamps to your Ford. Complete with wiring, lens, gaskets and bulbs. Sold in pairs.
 
14.95
 

Exhuast Kits - Dynomax 'Super Turbo Muffler', 2" Inlet/Outlet, 14" Long

- Exhuast Kits - Dynomax 'Super Turbo Muffler', 2" Inlet/Outlet, 14" Long.  These American-made Walker® components are the finest quality replacements available. Our NEW “SUPER TURBO” kit includes Walker “Super Turbo” low restriction mufflers for a noticeable performance improvement. All other kits feature OEM style replacement pieces. Walker components are designed for “bolt-on” driveway installations; no welding, fabricating or bending! Kits include H-pipe (or head pipe), exhaust pipes, tail pipes, muffers, tips (non-GT), clamps and hangers. Gain performance and Economy!
 
130.00
 

Flexible Engine Dipstick

- Flexible Engine Dipstick.  This slim flexible design bolts to the cylinder head. Includes stainless braided housing with aluminum fittings as well as E-Z read stick for convenient measuring of your engines oil. Fits 289 & 302 engines.
 
161.20
 

K&N X-Streme Air Flow Filter & Top Assemblies - 14" x 2-5/16"

- K&N X-Streme Air Flow Filter & Top Assemblies - 14" x 2-5/16".  Achieve maximum horsepower and air flow. Fits most Ford V8's with carburetors. SAVE UP TO 30%.
 
260.00
 

K&N X-Streme Air Flow Filter & Top Assemblies - 14" x 3"

- K&N X-Streme Air Flow Filter & Top Assemblies - 14" x 3".  Achieve maximum horsepower and air flow. Fits most Ford V8's with carburetors. SAVE UP TO 30%.
 
267.80
 

K&N X-Streme Air Flow Filter & Top Assemblies - 14" x 5"

- K&N X-Streme Air Flow Filter & Top Assemblies - 14" x 5".  Achieve maximum horsepower and air flow. Fits most Ford V8's with carburetors. SAVE UP TO 30%.
 
274.95
 

Pertronix Ignition Set - 6 Cyl. With Thermactor Set With Black Coil

- Pertronix Ignition Set -  6 Cyl. With Thermactor Set With Black Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
287.95
 

Pertronix Ignition Set - 6 Cyl. With Thermactor Set With Black Coil

- Pertronix Ignition Set -  6 Cyl. With Thermactor Set With Black Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
287.95
 

Pertronix Ignition Set - 6 Cyl. Without Thermactor Set With Black Coil

- Pertronix Ignition Set -  6 Cyl. Without Thermactor Set With Black Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
287.95
 

Pertronix Ignition Set - 6 Cyl. Without Thermactor Set With Black Coil

- Pertronix Ignition Set -  6 Cyl. Without Thermactor Set With Black Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
287.95
 

Pertronix Ignition Set - 6 Cyl. With Thermactor Set With Chrome Coil

- Pertronix Ignition Set - 6 Cyl. With Thermactor Set With Chrome Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
306.15
 

Pertronix Ignition Set - 6 Cyl. With Thermactor Set With Chrome Coil

- Pertronix Ignition Set - 6 Cyl. With Thermactor Set With Chrome Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
306.15
 

Pertronix Ignition Set - 6 Cyl. Without Thermactor Set With Chrome Coil

- Pertronix Ignition Set - 6 Cyl. Without Thermactor Set With Chrome Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
306.15
 

Pertronix Ignition Set - 6 Cyl. Without Thermactor Set With Chrome Coil

- Pertronix Ignition Set - 6 Cyl. Without Thermactor Set With Chrome Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
306.15
 

Pertronix Ignition Set - Single Point V8 Set With Black Coil

- Pertronix Ignition Set - Single Point V8 Set With Black Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
302.25
 

Pertronix Ignition Set - Single Point V8 Set With Black Coil

- Pertronix Ignition Set - Single Point V8 Set With Black Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
302.25
 

Pertronix Ignition Set - Single Point V8 Set With Chrome Coil

- Pertronix Ignition Set - Single Point V8 Set With Chrome Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
319.15
 

Pertronix Ignition Set - Single Point V8 Set With Chrome Coil

- Pertronix Ignition Set - Single Point V8 Set With Chrome Coil.  SAVE WHEN YOU BUY THE SET! Sets are available with 40,000 volt Black or Chrome Pertronix Coils. Sets include 1 Pertronix Ignitor Electronic Ignition, 1 Pertronix Flame Thrower Coil and 1 Pertronix Flame Thrower Spark Plug Wire Set.
 
319.15
 

Rear Drum To Dsic Brake Conversion Kit - For 14" Wheels

- Rear Drum To Dsic Brake Conversion Kit - For 14" Wheels.  The addition of this kit now gives you the opportunity to enjoy the performance and safety of rear wheel disc brakes. Complete bolt on kit fits all 1965-73 V-8 & 1964-70 Falcons with 14” or 15” wheels (except 9” rear end with 1/2” backing plate bolts). Detailed instructions included. These kits will not work with original steel wheels.
 
1,665.95
 

Rear Drum To Dsic Brake Conversion Kit - For 15" Wheels

- Rear Drum To Dsic Brake Conversion Kit - For 15" Wheels.  The addition of this kit now gives you the opportunity to enjoy the performance and safety of rear wheel disc brakes. Complete bolt on kit fits all 1965-73 V-8 & 1964-70 Falcons with 14” or 15” wheels (except 9” rear end with 1/2” backing plate bolts). Detailed instructions included. These kits will not work with original steel wheels.
 
2,295.15
 

Rear Drum To Dsic Brake Conversion Kit - Replacement Rotor For 15" Wheels

- Rear Drum To Dsic Brake Conversion Kit - Replacement Rotor For 15" Wheels.  The addition of this kit now gives you the opportunity to enjoy the performance and safety of rear wheel disc brakes. Complete bolt on kit fits all 1965-73 V-8 & 1964-70 Falcons with 14” or 15” wheels (except 9” rear end with 1/2” backing plate bolts). Detailed instructions included. These kits will not work with original steel wheels.
 
71.50
 

Sport Pedal Covers - Grey & Aluminium

- Sport Pedal Covers - Grey & Aluminium.  These universal fit pedal covers add a custom look and sporty feel when driving your vehicle. Available in three styles.
 
22.10
 

Tilt Column Installation Kit - Long Shaft

- Tilt Column Installation Kit - Long Shaft.  These are available in stainless steel or paintable steel and can be used with original or aftermarket steering wheels. For aftermarket wheels use 3601 hub kit. Note: Picture for reference only.
 
287.95
 

Tilt Column Installation Kit - Short Shaft

- Tilt Column Installation Kit - Short Shaft.  These are available in stainless steel or paintable steel and can be used with original or aftermarket steering wheels. For aftermarket wheels use 3601 hub kit. Note: Picture for reference only.
 
287.95
 

Tilt Column Installation Kits - Long Shaft

- Tilt Column Installation Kits - Long Shaft.  These are available in stainless steel or paintable steel and can be used with original or aftermarket steering wheels. For aftermarket wheels use 3601 hub kit.
 
287.95
 

Tilt Column Installation Kits - Short Shaft

- Tilt Column Installation Kits - Short Shaft.  These are available in stainless steel or paintable steel and can be used with original or aftermarket steering wheels. For aftermarket wheels use 3601 hub kit.
 
287.95
 

Universal Shift Boots - Blue

- Universal Shift Boots - Blue.  Give your car a custom look or just replace that worn out shift boot. These universal simulated leather shift boots come in 6 colors.
 
53.30
 

Universal Shift Boots - Yellow

- Universal Shift Boots - Yellow.  Give your car a custom look or just replace that worn out shift boot. These universal simulated leather shift boots come in 6 colors.
 
53.30
 

Vintage Racing Wheels - Vintage "45"

- Vintage Racing Wheels - Vintage "45".  We now carry several popular wheels from Vintage Wheel Works. These wheels all look great on any 1960-1970's Ford, and the large 16"x8" size allows you to use the latest hi-performance tires for improved handling. Sold in sets of four only, including center caps and chrome lug nuts.
 
2,357.55
 

Vintage Racing Wheels - Vintage "48"

- Vintage Racing Wheels - Vintage "48".  We now carry several popular wheels from Vintage Wheel Works. These wheels all look great on any 1960-1970's Ford, and the large 16"x8" size allows you to use the latest hi-performance tires for improved handling. Sold in sets of four only, including center caps and chrome lug nuts.
 
2,357.55
Displaying 1 to 93 (of 93 products) Result Pages:  1