Other

64-73 Mustang Other
Displaying 1 to 122 (of 122 products) Result Pages:  1 
 Product Name   Price 
 

1964-68 Cowl Side Panel - LH

Some early Ford now have rust in the cowl panels behind the fire well. If this is the case with yours then this panel with get you back on course with your restoration. fits left hand side

  • perfect fit
  • made to factory dimensions
  • finished in black satin 
 

Additional Images

1965-68 Cowl Side Panel
107.90
 

1964-68 Cowl Side Panel - RH

Some early Ford now have rust in the cowl panels behind the fire well. If this is the case with yours then this panel with get you back on course with your restoration. fits right hand side


  • perfect fit
  • made to factory dimensions
  • finished in black satin 


 

Additional Images

1965-68 Cowl Side Panel
107.90
 

1964-70 Inner Frame Patch - Convertible Only

If your is not from a dry state then by now it will be suffering from some form of rot in the inner frame rails. These patch panels help put back the strength back and get you mobile again.

  • Made from heavy gauge steel
  • Fit both sides (trimming required)
  • Fit all models
  • Fits 1964-70
 
44.20
 

1964-70 Rear Crossmember

Replacing your rear light panel on your 1964-70? Then complete the job and fit a new cross member at the same time

  • complete cross member
  • fits all years 64-70
  • easy to fit
 
46.80
 

1964-70 Seat Platform - Single Piece (Convertible)

Lots of 1964-70 Ford now have rusted out seat platforms! Whether restoring or not, safe seat bases are a must. So if yours are starting to rot replace them now before its to late.

Available for 65-68 coupe or 64-70 convertible
please state when ordering


  • One piece replaces both sides at once
  • Fit over trans tunnel
  • Easy to fit
 
353.60
 

1965 "Shelby Style" Rear Seat Replacement Panel - Reproduction

The Shelby mustang must be one of the worlds great cars. If you are creating a 1965 Shelby clone and are looking to be correct in all details then this Shelby style rear seat replacement panel is a must. Saves about 80lbs over factory rear seat. Originally used on the 1965-66 Shelby. Note: Fiberglass parts require special preparation and fitting. In some cases modification to fiberglass parts may be required. Fiberglass parts are sold “AS IS” with no guarantees against cracking, warping or poor fit. Purchaser assumes all responsibilities for correct installation. No returns are accepted on special order fiberglass parts.


  • Shelby style
  • Fiberglass
  • original looking


 
608.40
 

1965-66 Dash Panel Assembly

1965-66 Full Dash Panel Assembly.

Many early have had their dashes cut and modified over the last 45 years to fit radios, after market clocks, dials and switches leaving the dash looking like swiss cheese and full of holes.

Save time welding and filling all of the non factory holes and simply replace with this new dash.

  • 1 piece metal structure
  • Dash pad available separately
 
836.55
 

1965-66 Front Bumper Stone Guard - Original Ford Tooling

This stone guard for your 1965-66 is from Fords original tooling. So if originality is required then this stone guard will fit your requirements.

  • Original tooling
  • Perfect fit
  • Period correct
 
225.55
 

1965-66 Front Crossmember

Front cross members on the 1965-66 take a lot of abuse from road salt, rain, and of course leaky radiators and in most cases by now are showing signs of rust and rot they should therefore be replaced.

  • Adds strength
  • Black finish
 
71.50
 

1965-66 Latch Brace

1965-66 latch brace adds strength to the hood latch mechanism.

  • Black finish
 
16.90
 

1965-66 Lower Door Skin - LH

Lots of 1965-66 doors have rotted out bottoms however the rest of the door is fine therefore a new door skin is not required. If this is the case with yours then this lower repair panel is ideal.

  • Made from 20 gauge steel
  • Step flange on top edge
  • 8" high
 

Additional Images

78.65
 

1965-66 Lower Door Skin - RH

Lots of 1965-66 doors have rotted out bottoms however the rest of the door is fine therefore a new door skin is not required. If this is the case with yours then this lower repair panel is ideal.


  • Made from 20 gauge steel
  • Step flange on top edge
  • 8" high


 

Additional Images

78.65
 

1965-66 A Pillar / Post Kit

A-pillar Panel Kit.

Lots of 65-66 mustang are now suffering from rust in the lower A-posts.

So we now have available this full replacement kit.

The kit includes:
  • Both drivers & passengers side A-posts
  • Both drivers & passengers side upper and lower door hinge mounting plates

 
412.10
 

1965-66 Convertible Rear Seat Divider and Frame

Convertible Rear Seat Divider and Frame.

This part sits behind the rear seat.

  • Forms the soft top well
  • Power top pump mounts to this piece

 
555.75
 

1965-66 Fastback Rear Seat Trap Door - Steel

Fastback Rear Seat Trap Door - Steel.

Metal Trap Door 1965-66

For everyone with a 1965-66 Fastback Mustang who needs that little bit of extra room in there trunk this part is for you!
Going for a weekend away or a day out or just looking to increase the room this metal trap door will do the trick for you!

  • Easily attached
  • Increase space
 

Additional Images

456.30
 

1965-66 Front Bumper Stone Guard

Ford Mustang stone guards stop stones and in the process get damaged. so if yours is worse for wear replace it with a new one.

  • One piece
  • Easy fit
  • Finished in satin black
 
54.21
 

1965-66 Lower Grille Support

Lower Grille Support. 

This lower grille support does exactly what it says on the tin,  it supports the grille when mounted between the headlight assemblies.

  • Located behind the front bumper
  • Stamped steel
  • Black coated to protect against corrosion
 
74.75
 

1965-66 Radiator Support

Radiator Support.

An important structural part of your Mustang, this radiator support is located at the very front of the engine bay between the left and right inner fenders. As its name suggest it also supports the radiator.  Common replacement in vehicles that have suffered front end damage.

  • Fits all models
  • Stamped steel
  • Comes in black primer for corrosion protection
 
136.50
 

1965-66 Radiator Support to Frame Bracket / Strut Rod Brace - LH

1965-1966 Radiator Support to Frame Bracket / Strut Rod Brace - Drivers Side.

This LH strut rod brace will reinforce your body.  It welds to both the front cross member and frame to add strength and integrity.  It also provides a mounting point for the strut rod.

  • 16-1/2" x 4-1/4"
  • Passenger side also available
  • Requires welding
 
93.60
 

1965-66 Radiator Support to Frame Bracket / Strut Rod Brace - RH

Radiator Support to Frame Bracket / Strut Rod Brace - Passenger Side.

Located between the radiator support cross member and the frame this bracket is used for mounting your strut rod as well as adding rigidity to your body.

  • Welding required
  • Fits all models
  • Retains body strength
 
93.60
 

1965-66 Rear Cowl / Window Panel - Convertible

Rear Cowl / Window Panel - Convertible. 

Yet another common area of rust on early mustangs, the panel between the rear window and the trunk lid may have rust spreading across it like an infectious rash.  Cut out that rot and replace with this quality weld in part.

  • Fits convertible only
  • Often referred to as a "Deck lid filler panel"
  • Connects the quarter panels
 

Additional Images

1965-66 Rear Cowl
74.75
 

1965-66 Rear Cowl / Window Panel - Coupe

Rear Cowl / Window Panel - Coupe. 

Located between the trunk lid, the rear window and the quarter panels this piece of sheet metal is the missing piece of the puzzle when putting your Mustang back together.  Don't compromise your restoration using old sheet metal, simply weld in this deck lid filler panel for an outstanding finish.

  • Fits 1965-66 Coupe
  • Welding required
  • Quality part
 

Additional Images

1965-66 Rear Cowl
112.45
 

1965-66 Rear Cowl / Window Panel - Fastback

Rear Cowl / Window Panel - Fastback. 

The sweeping roof line of the much sought after Fastback Mustang extends to this rear cowl panel before meeting with the deck lid.  An area often plagued by rust on these early classics it is easily replaced with this new panel and a welder.

  • Fits Fastback only
  • Connects to the quarter panels
  • Panel behind the rear winow

 

Additional Images

1965-66 Rear Cowl
168.35
 

1965-66 Tail Lamp / Rear Light / Back Panel

Tail Lamp/ Rear Light/Back Panel. 

Whether your Pony has been the victim of a rear end shunt or you're simply restoring her to her former glory this tail lamp panel will help you along the way.  This is the rear panel of your Mustang, located between the quarter panels, to which the tail lights mount.

  • Steel panel
  • Fits all models
  • Has hole for fuel filler
 
136.50
 

1965-66 Tail Lamp Panel Brace - Convertible

Tail Lamp Panel Brace - Convertible. 

This stamped steel brace fits right behind your tail lamp panel supporting it from behind.  The brace allows the fuel filler neck to pass through it.

  • Stamped steel
  • Fits convertible only
  • Strengthening part
 
74.88
 

1965-66 Tail Lamp Panel Brace - Coupe/Fastback

Tail Lamp Panel Brace - Coupe/Fastback.

This stamped steel brace has a multitude of functions! Not only does it support your tail light panel from behind, it also provides a mounting place for the trunk latch striker plate.

  • Visible from inside the trunk
  • Fuel filler neck passes through it
  • 12" L x 5-13/16" W
 
66.30
 

1965-68 Inner Cowl Patch Panel - Left Side

1965-1968 Inner Cowl Patch Panel - Driver Side.

A leaky cowl is often the product of trapped water which rots the metal surrounding the cowl air vent.  Removing the top section of the cowl and welding in these patch panels will ensure your feet stay dry inside Mustang.

  • 15-1/2" x 18"
  • 19 gauge steel
  • Passenger side also available.
 
104.83
 

1965-68 Inner Cowl Patch Panel - Right Side

1965-1968 Inner Cowl Patch Panel - Passenger Side.

This patch panel replaces the section of the lower cowl ofter rusted away by a build up of leaves and water over the years. Don't let a leaky cowl dampen your enthusiasm for your Mustang. Repair it today with this 19 gauge steel inner cowl piece.

  • 15-1/2" x 18"
  • Requires welding
  • Removal of the upper cowl is necessary for installation
 
104.83
 

1965-68 Rear Frame Rail - LH Coupe/Fastback

Driver Side Rear Frame Rail for a 1965-1970 Coupe/Fastback.

It's possible that over time your beloved frame rails have been attacked by rust. Help is at hand with this complete rear frame rail assembly which includes the rear torque box and leaf spring shackle mounting points.

  • 67-1/2" Long
  • Fits Coupe & Fastback
  • Passenger side also available
 
471.64
 

1965-68 Rear Frame Rail - RH Coupe/Fastback

Rear Frame Rail Passenger Side for a 1965-1968.

The rear frame rail forms part of what is known as the chassis, the under body of your vintage Mustang.  This complete rear frame rail features the rear torque box which is a strengthening feature used to stop the chassis from twisting.

  • 67-1/2" Long
  • Fits Coupe & Fastback
  • Driver side also available
 
471.64
 

1965-68 Seat Base / Platform - LH (Coupe/2+2)

1965-1968 Seat Platform - LH (Coupe/2+2).  Available for 1965-68 coupes/2+2 and 1964-70 convertibles. This is the base that the front seats attach to.
 
114.14
 

1965-68 Seat Base / Platform - RH (Coupe/2+2)

1965-1968 Seat Platform - RH (Coupe/2+2).  Available for 1965-68 coupes/2+2 and 1964-70 convertibles. This is the base that the front seats attach to.
 
114.14
 

1965-70 Convertible Reinforcement Seat Panel - LH

Convertible Reinforcement Seat Panel - Driver Side.

The convertible Mustang certainly isn't lacking in style! It is however lacking a little in structural integrity due to having no roof.  Add the rigidity it needs with these reinforcement panels located on the underside of the floor pan directly below the seats.

  • Die stamped sheet metal
  • 22-1/2" x 16-3/4"
  • Passenger side also available
 

Additional Images

1965-70 Reinforcement Panel
99.12
 

1965-70 Convertible Reinforcement Seat Panel - RH

Convertible Reinforcement Seat Panel - Passenger Side.

The convertible Mustang body does not offer the same rigidity as the other models due to its desirable fold away roof.  Fear not, these reinforcement panels are designed to add the structural integrity you crave. Panel measures 22-1/2" x 16-3/4".

  • Die stamped sheet metal
  • Located below the seats on the underneath of the floor pan
  • Driver side also available
 

Additional Images

1965-70 Reinforcement Panel
99.12
 

1965-70 Cowl Vent Repair Kit

Cowl Vent Repair Kit. 

A quick fix to that all too common problem of a leaky cowl panel. 

Kit includes:

  • 2 plastic "hats"
  • Sealant
  • Instructions
 
39.00
 

1965-70 Over Axle / Transition Panel with Shock Mounts

Over Axle / Transition Panel with Shock Mounts.
The transition panel fits between the rear seat and trunk.  It is what the top of the rear shocks bolt through.
 
607.10
 

1965-70 Rear Frame Rail Rear Section - LH

Rear Frame Rail Rear Section - LH. 

This stamped steel frame rail section replaces the rear part of the rear frame rail. It is not a patch or repair piece it replaces the last 29" of the rear chassis rail.

  • Includes reinforcement for leaf spring shackle mounting
  • Fits all models
  • Common area of corrosion on 65-70
 
65.39
 

1965-70 Rear Frame Rail Rear Section - RH

Rear Frame Rail Rear Section - RH. 

This is the 29" section of the rear frame rail at the very back of the vehicle.  The chassis is the very base of your classic vehicle so when restoring her you need to start with this part to give you a solid frame with which to build on.

  • Stamped steel
  • Provides reinforcement for leaf spring shackle mounting
  • Fits Coupe, Convertible & Fastback
 
65.39
 

1965-73 Drain Hole Coverlet

Drain Hole Coverlet. 

These oval drain hole covers can be removed if for some unfortunate reason your acquires excess water inside.  These are sold individually and there are 4 required.  They are located at the front and rear of the driver and passenger side floors.

  • 3" x 4-1/2"
  • Fits all models
  • Stamped steel
 
3.90
 

1966 "Shelby Style" Rear Seat Replacement Panel - Reproduction

1966 "Shelby Style" Rear Seat Replacement Panel - Reproduction.  Saves approximately 80lbs. Shelby style, fiberglass rear seat replacement panel originally used on the 1965-66 Shelby. Note: All fiberglass parts require special preparation and fitting. In some cases modification to fiberglass parts may be required. Fiberglass parts are sold “AS IS” with no guarantees against cracking, warping or poor fit. Purchaser assumes all responsibilities for correct installation. No returns are accepted on special order fiberglass parts.
 
502.45
 

1967 Coupe To Fastback Conversion Kit (Structural)

1967 Coupe To Fastback Conversion Kit.

The 1967 Fastback is now iconic but along with this comes the price.

We have seen bare shells with titles for $10,000 plus! These then require a further $10,000 to restore the shell.

So why not convert your Coupe into the iconic Fastback for a fraction of the price.

Our fully comprehensive kit comes with all parts required to convert your 1967 Coupe to Fastback (structurally).

Our kit includes all parts below:

  • Front roof brace
  • Rear roof brace
  • Fastback roof panel
  • Trunk panel brace
  • Deck Lid Hinges-Pair
  • Rear filler panel
  • Door & quarter frame assembly - LH & RH
  • Quarter vent door assembly - LH & RH
  • Rear quarter panel - LH & RH
 

Additional Images

1967 Fastback Quarter Assembly1967 Deck Lid Hinges1967 Roof Brace
9,359.74
 

1967 Cast Aluminium Tail Lamp Panel - 2+2

Cast Aluminium Tail Lamp Panel - 2+2.  Sold in pairs. Attaching hardware included. #40584A pictured above.
 
419.90
 

1967 Cast Aluminium Tail Lamp Panel - Coupe/Convertible

Cast Aluminium Tail Lamp Panel - Coupe/Convertible.  Sold in pairs. Attaching hardware included. #40584A pictured above.
 
419.90
 

1967-68 Kick/Cowl Panel (Left)

kick/cowl panel (left) for a 1967-68.  Newly available for 1967-68 are these outer kick/cowl panel replacements. Excellent reproductions.
 
108.48
 

1967-68 Kick/Cowl Panel (Right)

kick/cowl panel (right) for a 1967-68.  Newly available for 1967-68 are these outer kick/cowl panel replacements. Excellent reproductions.
 
108.48
 

1967-68 A Pillar / Post Kit

A-pillar Panel Kit.

Lots of 67-68 mustang are now suffering from rust in the lower A-posts.

So we now have available this full replacement kit.

The kit includes:
  • Both drivers & passengers side A-posts
  • Both drivers & passengers side upper and lower door hinge mounting plate
 
424.84
 

1967-68 Cowl Cover Panel

Cowl Cover Panel.  Fits between your hood and windshield.  Includes Upper and Lower Cowl Panels.
 
795.47
 

1967-68 Door Striker Kit With Date Code 8/66

Door Striker Kit With Date Code 8/66.  These door striker plates are made of Silver cadmium, and have an original type date stamp on the head.
 
29.25
 

1967-68 Fastback - Rear Upper Panel Brace

Fastback - Rear Upper Panel Brace.  This item is a steel replacement trunk divider upper brace for 1967-68 Fastbacks.
 
504.40
 

1967-68 Fastback Rear Quarter Panel / Door Frame Assembly - LH

Fastback Door Frame and Quarter Assembly LH

Rusted A-post, rocker panels and wheel house? Why not replace the whole lot in one go.

This part consists of:
  • A-Post
  • Roof line cant rail
  • B-Post door jamb
  • Inner & outer wheelhouse
  • Surrounding reinforcement
 
2,060.50
 

1967-68 Fastback Rear Quarter Panel / Door Frame Assembly - RH

Fastback Door Frame and Quarter Assembly RH

Rusted A-post, rocker panels and wheel house? Why not replace the whole lot in one go.

This part consists of:
  • A-Post
  • Roof line cant rail
  • B-Post door jamb
  • Inner & outer wheelhouse
  • Surrounding reinforcement


 
2,060.50
 

1967-68 Fastback Rear Seat Trap Door

rear seat trap door for a 1967-68 Fastback.
 
434.20
 

1967-68 Front Bumper Stone Guard

Front Bumper Stone Guard.  Reproduction.
 
49.40
 

1967-68 Front Bumper Stone Guard - E-Coated Black

Front Bumper Stone Guard - E-Coated Black.  Reproduction. Same gauge & weight as OEM, E-coated Black
 
355.55
 

1967-68 Front Crossmember

Front Crossmember.  Mounts under radiator core support.
 
71.50
 

1967-68 Lower Cowl Panel

lower cowl panel.
 
348.40
 

1967-68 Lower Rear Quarter - LH

Lower Rear Quarter - LH.  Has original contour on back, bottom & wheel opening. More than 12” high.296.0000
 
46.80
 

1967-68 Lower Rear Quarter - RH

Lower Rear Quarter - RH.  Has original contour on back, bottom & wheel opening. More than 12” high.
 
46.80
 

1967-68 Luggage Compartment Door - 2+2

Luggage Compartment Door - 2+2.  Reproduction. NOTE: Requires Truck freight.
 
218.40
 

1967-68 Luggage Compartment Door - Coupe/Convertible

Luggage Compartment Door - Coupe/Convertible.  Reproduction. (Exc. Shelby & GT/CS). NOTE: Requires Truck freight.
 
254.80
 

1967-68 Radiator Support

Radiator Support.  Reproduction.
 
151.58
 

1967-68 Rear Cowl Panel - Coupe

Rear Cowl Panel - Coupe.  Between rear window and trunk lid.
 
139.10
 

1967-68 Rear Cowl Panel - Fastback

Rear Cowl Panel - Fastback.  Between rear window and trunk lid.
 
139.10
 

1967-68 Steel Dash Panel with knee holes

steel dash panel with knee holes.
 
729.95
 

1967-68 Steel Dash Panel without knee holes

steel dash panel without knee holes.
 
729.95
 

1967-68 Stone Deflector Bracket - 3 Piece

Stone Deflector Bracket - 3 Piece.
 
69.55
 

1967-68 Tail Lamp Panel

Tail Lamp Panel.  Reproduction. (Exc 68 GT/CS, GT350/500).
 
138.45
 

1967-68 Tail Lamp Panel Brace

Tail Lamp Panel Brace.  Sold individually.
 
74.75
 

1967-68 Windshield Filler Panels

filler panels (pair).  This part is located at the bottom of your windshield. Paint to match your interior.
 
95.55
 

1967-70 Radiator Support Bracket (LH)

Radiator Support Bracket (LH) for a 1967-1970.  This piece is welded to the frame at the radiator support. The strut rod attaches to the bottom of the brace.
 
95.55
 

1967-70 Radiator Support Bracket (RH)

Radiator Support Bracket (RH) for a 1967-1970.  This piece is welded to the frame at the radiator support. The strut rod aatches to the bottom of the brace.
 
95.55
 

1968 California Special Function Side Scoops

Pair of California Special Function Side Scoops for a 1968.  All Fiberglass Parts require special preparation and fitting. In some cases modification to car and or part may be required. All Fiberglass Parts are sold as is with no guarantees against cracking, warping, or poor fit. Fiberglass Parts are after market replacement parts. Purchaser assumes all responsibility for correct installation. Sold in pairs.
 
430.95
 

1968 California Special Tail Lamp Panel

1968 California Special Tail Lamp Panel.  steel replacement tail lamp panel for 1968. The part was originally made out of fiberglass and now is available in steel. Won't scratch & crack like fiberglass.
 
410.80
 

1968 California Special Tail Lamp Panel - Steel

1968 California Special Tail Lamp Panel - Steel.  steel replacement tail lamp panel for 1968. The part was originally made out of fiberglass and now is available in steel. Won't scratch & crack like fiberglass.
 
410.80
 

1968 Coupe to Fastback Structural Conversion Kit

1968 Coupe To Fastback Conversion Kit.

Many re-builders and restoration shops have been doing this conversion for years and now with the price of fastbacks rocketing it has become a popular conversion.

Unlike in the old days when you had to find out exactly what parts you needed (or ask someone who had done it before) and buy the parts only to find at the critical point that you are missing that $5 part that stops the build .

Now it is so much easier with our all in one kit!

All the parts you need to turn your Coupe into a Fastback are here (structural metal work only).

The kit includes:
  • Front roof brace
  • Rear roof brace
  • Fastback roof panel
  • Trunk panel brace
  • Deck Lid Hinges-Pair
  • Rear filler panel
  • Door & quarter frame assembly - LH & RH
  • Quarter vent door assembly - LH & RH
  • Rear quarter panel - LH & RH
 
9,359.74
 

1968-70 Door Striker Kit With Date Code 11/67

1968-1970 Door Striker Kit With Date Code 11/67.  These door striker plates are made of Silver cadmium, and have an original type date stamp on the head.
 
29.25
 

1969 Coupe To Fastback Conversion Kit (Structural)

1969 Coupe To Fastback Conversion Kit.

Many re-builders and restoration shops have been doing this conversion for years and now with the price of fastbacks rocketing it has become a popular conversion.

Unlike in the old days when you had to find out exactly what parts you needed (or ask someone who had done it before) and buy the parts only to find at the critical point that you are missing that $5 part that stops the build .

Now it is so much easier with our all in one kit!

All the parts you need to turn your Coupe into a Fastback are here (structural metal work only).

The kit includes:
  • Front roof brace
  • Rear roof brace
  • Fastback roof panel
  • Trunk panel brace
  • Deck Lid Hinges-Pair
  • Rear filler panel
  • Door & quarter frame assembly - LH & RH
  • Quarter vent door assembly - LH & RH
  • Rear quarter panel - LH & RH
 

Additional Images

1969 Quarter Panel1969 Deck Lid Filler Panel1969 Door Frame Assembly
9,360.00
 

1969 Fastback Rear Quarter Panel / Door Frame Assembly - LH

1969 Mustang Fastback Door Frame and Quarter Assembly LH

Rusted A-post, rocker panels and wheel house? Why not replace the whole lot in one go.

This part consists of:
  • A-Post
  • Roof line cant rail
  • B-Post door jamb
  • Inner & outer wheelhouse
  • Surrounding reinforcement



 
2,993.90
 

1969 Fastback Rear Quarter Panel / Door Frame Assembly - RH

1969 Mustang Fastback Door Frame and Quarter Assembly RH

Rusted A-post, rocker panels and wheel house? Why not replace the whole lot in one go.

This part consists of:
  • A-Post
  • Roof line cant rail
  • B-Post door jamb
  • Inner & outer wheelhouse
  • Surrounding reinforcement


 
2,993.90
 

1969 Front Bumper Stone Guard

1969 Front Bumper Stone Guard.  Reproduction.
 
49.40
 

1969 Grille Components

1969 Grille Components.  Outer headlamp doors, chrome, RH or LH, each.
 
25.35
 

1969 Radiator Support

1969 Radiator Support.  Reproduction.
 
222.30
 

1969 Tail Lamp Panel

1969 Tail Lamp Panel.  Reproduction. (Exc Shelby).
 
218.40
 

1969-70 "OE" Style Fiberglass Rear Spoiler

1969-1970 "OE" Style Fiberglass Rear Spoiler.  Available for 1969-70 and 1971-73. Comes with all attaching hardware. Unpainted. Guaranteed no sagging.
 
694.85
 

1969-70 Fastback Rear Seat Trap Door - Steel

1969-1970 Fastback Rear Seat Trap Door - Steel.
 
456.30
 

1969-70 Fastback Tail Lamp Mounting Panel - LH

1969-1970 Fastback Tail Lamp Mounting Panel - LH.  For 2+2 only.
 
107.90
 

1969-70 Fastback Tail Lamp Mounting Panel - RH

1969-1970 Fastback Tail Lamp Mounting Panel - RH.  For 2+2 only.
 
107.90
 

1969-70 Frame Support Pair

1969-1970 Frame Support Pair.  1969-70 firewall to floor frame support. After years of road wear strengthen your frame with these supports. Sold in pairs.
 
135.85
 

1969-70 Frame Supports

Pair of 1969-70 Frame supports that fit a.  Firewall to floor support. Sold in pairs.
 
135.85
 

1969-70 Front Crossmember

1969-1970 Front Crossmember.  Mounts under radiator core support.
 
57.20
 

1969-70 Inner Upper Door Trim - Textured Steel - LH

1969-1970 Inner Upper Door Trim - Textured Steel - LH.
 
179.40
 

1969-70 Inner Upper Door Trim - Textured Steel - RH

1969-1970 Inner Upper Door Trim - Textured Steel - RH.
 
179.40
 

1969-70 Lower Cowl Panel

lower cowl panel for a 1969-1970.
 
418.60
 

1969-70 Lower Rear Quarter - Coupe/Convertible LH

1969-1970 Lower Rear Quarter - Coupe/Convertible LH.  Has original contour on back, bottom & wheel opening. More than 12” high.
 
81.90
 

1969-70 Lower Rear Quarter - Coupe/Convertible RH

1969-1970 Lower Rear Quarter - Coupe/Convertible RH.  Has original contour on back, bottom & wheel opening. More than 12” high.
 
81.90
 

1969-70 Lower Rear Quarter - Fastback LH

1969-1970 Lower Rear Quarter - Fastback LH.  Has original contour on back, bottom & wheel opening. More than 12” high.
 
81.90
 

1969-70 Lower Rear Quarter - Fastback RH

1969-1970 Lower Rear Quarter - Fastback RH.  Has original contour on back, bottom & wheel opening. More than 12” high.
 
81.90
 

1969-70 Luggage Compartment Door - 2+2

1969-1970 Luggage Compartment Door - 2+2.  Reproduction. NOTE: Requires Truck freight.
 
254.80
 

1969-70 Rear Cowl Panel - Fastback

1969-1970 Rear Cowl Panel - Fastback.  Between rear window and trunk lid.
 
139.10
 

1969-70 Rear Spoiler

1969-1970 Rear Spoiler.  Available for 1969-70. Comes with all attaching hardware.
 
273.00
 

1969-70 Rear Spoiler Lower Support Brackets

These are a set of Rear Spoiler Lower support brackets for a 1969-1970.
 
49.40
 

1969-70 Reproduction Rear Wing Pedestal Kit

1969-1970 Reproduction Rear Wing Pedestal Kit.  Die-cast aluminum. Includes pedestals, pads and hardware.
 
115.70
 

1969-70 Seat Base / Platform - LH (Coupe/2+2)

1969-70 Seat Platform LH.  Will fit 1969-70 Coupe and Fastback.

The seat platform is the box section that the seat fixes to, and is welled to the floor pan.

  • Easy fitment
  • Finished in plain metal
 
135.20
 

1969-70 Seat Base / Platform - RH (Coupe/2+2)

1969-70 Seat Platform RH.  Will fit 1969-70 Coupe and Fastback.

The seat platform is the box section that the seat fixes to, and is welled to the floor pan.

  • Easy fitment
  • Finished in plain metal


 
135.20
 

1970 Fender Extension - LH

1970 Fender Extension - LH.
 
514.67
 

1970 Fender Extension - RH

1970 Fender Extension - RH.
 
514.67
 

1970 Front Bumper Stone Guard

1970 Front Bumper Stone Guard.  Reproduction.
 
49.40
 

1970 Grille Components

1970 Grille Components.  Headlamp doors, pair, reproduction.
 
71.50
 

1970 Radiator Support

1970 Radiator Support.  Reproduction.
 
235.30
 

1970 Tail Lamp Panel

1970 Tail Lamp Panel.  Reproduction. (Exc Shelby).
 
200.20
 

1971-73 "OE" Style Fiberglass Rear Spoiler

"OE" Style Fiberglass Rear Spoiler.  Available for 1969-70 and 1971-73. Comes with all attaching hardware. Unpainted. Guaranteed no sagging.
 
771.55
 

1971-73 Lower Rear Quarter - LH

Lower Rear Quarter - LH.  Has original contour on back, bottom & wheel opening. More than 12” high.
 
84.50
 

1971-73 Lower Rear Quarter - RH

Lower Rear Quarter - RH.  Has original contour on back, bottom & wheel opening. More than 12” high.
 
84.50
 

1971-73 Lower Rear Quarter Inner Panel - LH

Lower Rear Quarter Inner Panel - LH.  This repair panel for the trunk area overlaps the trunk floor by 1" and drops off the meet the bottom of the quarter panel. H-9 1/2" x L-20 1/4".
 
33.15
 

1971-73 Lower Rear Quarter Inner Panel - RH

Lower Rear Quarter Inner Panel - RH.  This repair panel for the trunk area overlaps the trunk floor by 1" and drops off the meet the bottom of the quarter panel. H-9 1/2" x L-20 1/4".
 
33.15
 

1971-73 Radiator Support

Radiator Support.  Reproduction.
 
328.25
 

1971-73 Rear Spoiler

Rear spoiler for a 1971-1973.
 
299.00
 

1971-73 Reproduction Rear Wing Pedestal Kit

Reproduction Rear Wing Pedestal Kit.  Die-cast aluminum. Includes pedestals, pads and hardware.
 
115.70
 

1971-73 Seat Base / Platform - LH (Coupe/2+2)

1971-73 seat platform LH.  Will fit 1971-73 Coupe and Fast Back.

The seat platform is the box section that the seat fixes to, and is welled to the floor pan.
  • Easy fitment
  • Finished in plain metal


 

Additional Images

71-73 Seat Platform
158.60
 

1971-73 Seat Base / Platform - RH (Coupe/2+2)

1971-73 seat platform RH.  Will fit 1971-73 Coupe and Fast Back.

The seat platform is the box section that the seat fixes to, and is welled to the floor pan.
  • Easy fitment
  • Finished in plain metal


 

Additional Images

71-73 Seat Platform
201.50
 

1971-73 Tail Lamp Panel

Tail Lamp Panel.  Reproduction.
 
187.20
 

All Around Autobody Sealant

All Around Autobody Sealant.  Can be used for sealing interior and exterior auto body joints and seams. Applies easily, can be smoothed to a feather edge with a wet finger. Seals to a firm, tough, rubeer like, water resistant ead. Can be painted in about 30 minutes. Cartridge.
 
31.20
Displaying 1 to 122 (of 122 products) Result Pages:  1