Trunk Parts

64-73 Mustang Trunk Parts
Displaying 1 to 33 (of 33 products) Result Pages:  1 
 Product Name+   Price 
 

1964-66 Inner Trunk Bracket - LH

1964-1966 Inner Trunk Bracket - Drivers Side

This bracket is spot welded to the trunk floor and supports the tail lamp panel.

The rear bumper bracket simply bolts to this piece when mounting the rear bumper (available separately).

  • Requires welding
  • Passenger side also available
  • Suitable for Coupe, Convertible & Fastback
 
£44.20
 

1964-66 Inner Trunk Bracket - RH

1964-1966 Inner Trunk Bracket - Passenger Side.

Whilst reinforcing the tail light panel this bracket also provides a mounting point for the rear bumper bracket.

Requires spot welding to the trunk floor.

  • Quality part
  • Easy to fit
  • Fits all models
 
£44.20
 

1965-66 Deck / Trunk Lid - Coupe/Convertible

Deck / Trunk Lid - Coupe/Convertible. 

This quality reproduction, stamped steel replacement trunk lid features all of the factory mounting points so it fits like a glove.  Years on the road may have left several of the panels on your 65-66 Mustang looking weathered or old. A new deck lid is a must when fully restoring your coupe or convertible.

  • Easy to fit
  • Hinges sold separately
  • Also known as luggage compartment door
 

Additional Images

1965-66 Deck Liid
£351.00
 

1965-66 Deck / Trunk Lid - Coupe/Convertible GT/CS Fiberglass Trunk Lid With Spoiler

Deck / Trunk Lid - Coupe/Convertible GT/CS Fiberglass Trunk Lid With Spoiler.

If your looking for something different and want your 65-66 Mustang to stand out from the crowd, this fiberglass trunk lid is a great place to start.  The '68 Shelby & California Special both featured this 3 piece deck lid complete with spoiler and end caps.  Give you vehicle this much sort after style using this replacement part.
  • Mounts using stock hinges and hardware
  • Fits Coupe & Convertible
  • As with all fiberglass, some prepping and fitting may be required
 
£1,123.20
 

1965-66 Deck / Trunk Lid - Fastback

Deck / Trunk Lid - Fastback. 

If the rear end of your Mustang looks like the back end of a bus it's time to replace your deck lid. Whether bent, buckled or rusted don't spoil the look of your valuable classic. Use this trunk lid to give her a desirable posterior!

  • Fits fastback only
  • Stamped steel
  • Features original mounting points
 

Additional Images

1965-66 Fastback Deck Lid
£328.90
 

1965-66 Deck / Trunk Lid - Fiberglass - Shelby Style - Fastback

Deck / Trunk Lid - Fiberglass - Shelby Style - Fastback.

Give your Mustang the WOW factor with this Shelby Style deck lid!  Dress your 65-66 Fastback as Carrol Shelby intended by adding this lightweight trunk lid complete with matching end caps.
  • Test fit recommended before prepping or painting
  • Utilizes stock hinges 
  • Quality part
 

Additional Images

1965-66 Deck Lid
£1,047.80
 

1965-66 Rear Trunk Corner - LH - Coupe/Convertible

Rear Trunk Corner - Drivers side.

A common rust area on all because of the nature of its purpose. This stamped steel bracket replaces the corner of trunk rain gutter where the quarter panel and tail lamp panel meet.

  • Fits 1965-66 Coupe & Convertible
  • Passenger side also available
  • Requires welding
 

Additional Images

1965-66 Rear Trunk Corner
£55.90
 

1965-66 Rear Trunk Corner - LH - Fastback

Rear Trunk Corner - Drivers side.

A common rust area on all because of the nature of its purpose. This stamped steel bracket replaces the corner of trunk rain gutter where the quarter panel and tail lamp panel meet.

  • Fits Fastback
  • Passenger side also available
  • Requires welding
 
£110.50
 

1965-66 Rear Trunk Corner - RH - Coupe/Convertible

Rear Trunk Corner - Passenger side.

This area is prone to rust on all and is normally rotten beyond repair. This stamped steel bracket welds to the quarter panel and tail light panel. It forms part of the trunk gutter.

  • Fits 1965-66 Coupe & Convertible
  • Driver side also available
  • Requires welding
 

Additional Images

1965-66 Rear Trunk Corner
£55.90
 

1965-66 Rear Trunk Corner - RH - Fastback

Rear Trunk Corner - Passenger side.

This area is prone to rust on all and is normally rotten beyond repair. This stamped steel bracket welds to the quarter panel and tail light panel. It forms part of the trunk gutter.

  • Fits Fastback
  • Driver side also available
  • Requires welding
 
£110.50
 

1965-70 Complete Trunk Floor Convertible

Complete Trunk Floor. 

If when you pop the trunk lid on your you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor.  Use this complete assembly when there are just too many rust holes to patch up.

This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.

Includes:
  • Trunk floor extensions
  • Trunk Inner Brackets
  • 2 rubber body plugs
 
£793.00
 

1965-70 Complete Trunk Floor Convertible with Transition Pan

Complete Trunk Floor. 

If when you pop the trunk lid on your you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor.  Use this complete assembly when there are just too many rust holes to patch up.

This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.

Includes:
  • Trunk floor extensions
  • Trunk Inner Brackets
  • 2 rubber body plugs
 
£975.00
 

1965-70 Complete Trunk Floor Coupe/Fastback

Complete Trunk Floor. 

If when you pop the trunk lid on your you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor.  Use this complete assembly when there are just too many rust holes to patch up.

This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.

Includes:
  • Trunk floor extensions
  • Trunk Inner Brackets
  • 2 rubber body plugs
 
£793.00
 

1965-70 Complete Trunk Floor Coupe/Fastback with Transition Pan

Complete Trunk Floor. 

If when you pop the trunk lid on your you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor.  Use this complete assembly when there are just too many rust holes to patch up.

This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.

Includes:
  • Trunk floor extensions
  • Trunk Inner Brackets
  • 2 rubber body plugs
 
£812.50
 

1965-70 Convertible Trunk Brace End Cap LH

pair of 1965-1970 Convertible Trunk Brace End Cap LH 

These pieces need to be replaced when changing your trunk floor rear cross member.

These pieces fix at either end of the rear floor cross member reinforcement, located above the trunk floor cross member.  These parts are available separately.

  • Driver Side
  • Fits 1965-70 Convertible
 
£104.00
 

1965-70 Convertible Trunk Brace End Cap RH

pair of 1965-1970 Convertible Trunk Brace End Cap RH

These pieces need to be replaced when changing your trunk floor rear cross member.

These pieces fix at either end of the rear floor cross member reinforcement, located above the trunk floor cross member.  These parts are available separately.

  • Passenger Side
  • Fits 1965-70 Convertible
 
£104.00
 

1965-70 Trunk Floor Panel Drop Off - RH

Trunk Floor Panel Drop Off - Passenger side.

This is the part inside the trunk, next to the fuel tank, on top of the frame rail.

Whether completing a ground up restoration or simply making your Mustang road worthy the chances are that this panel will need replacing. In 95% of this drop off panel is full of rust holes.

  • Fits Coupe, Convertible & Fastback
  • Dimensions: 33-11/16" L x 8-5/16" W
  • 1" trimming required for 1969-70 models.
 

Additional Images

1965-70 Trunk Panel
£74.10
 

1965-70 Trunk Floor Panel Drop Off- LH

Trunk Floor Panel Drop Off - Drivers side.

Whatever the year or model of your Mustang, the chances are that these trunk floor drop offs will need replacing.  This is one of the top 3 most common areas to find rust on your Coupe, Convertible or Fastback. 

This is the part located to the side of the fuel tank above the frame rail.

  • Quality reproduction
  • Measures 33-11/16" L x 8-5/16" W
  • Requires approximately 1" trimming for 1969-70 models.
 

Additional Images

1965-70 Trunk Panel
£74.10
 

1967-68 Inner Trunk Bracket LH

Inner Trunk Bracket. 

This bracket reinforces the tail light panel where the rear bumper attaches. It spot welds to trunk floor and rear cross member.

  • Fits Coupe, Convertible & Fastback
  • Fits driver side
  • Welding required
 
£45.50
 

1967-68 Inner Trunk Bracket RH

Inner Trunk Bracket. 

This bracket reinforces the tail light panel where the rear bumper attaches. It spot welds to trunk floor and rear cross member.

  • Fits Coupe, Convertible & Fastback
  • Fits passenger side
  • Welding required
 
£45.50
 

1967-68 Rear Trunk Corner - LH (Fastback)

Rear Trunk Corner - Driver side.

This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening.  Most Fastbacks have suffered some corrosion in this area.
  • Stamped steel
  • Welding required
  • Passenger side also available
 
£52.00
 

1967-68 Rear Trunk Corner - RH (Coupe/Convertible)

Rear Trunk Corner - Passenger side.

This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening.  Most Coupe or Convertibles have suffered some corrosion in this area.
  • Stamped steel
  • Welding required
  • Driver side also available
 
£42.25
 

1967-68 Rear Trunk Corner - RH (Fastback)

Rear Trunk Corner - Passenger side.

This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening.  Most Fastbacks have suffered some corrosion in this area.
  • Stamped steel
  • Welding required
  • Driver side also available
 
£52.00
 

1969-70 Inner Trunk Bracket

1969-1970 Inner Trunk Bracket. 

This inner trunk bracket bolts to your tail lamp panel and welds the to trunk floor thus keeping your tail light panel fixed securely.


  • Requires welding
  • Fits all models
  • Steel
  • Fits either side
 
£52.00
 

1969-70 Rear Trunk Corner - LH (Fastback)

1969-1970 Rear Trunk Corner - Driver side.

This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening.  Most Fastbacks have suffered some corrosion in this area.
  • Stamped steel
  • Welding required
  • Passenger side also available
 
£104.00
 

1969-70 Rear Trunk Corner - RH (Fastback)

1969-1970 Rear Trunk Corner - Passenger side.

This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening.  Most Fastbacks have suffered some corrosion in this area.
  • Stamped steel
  • Welding required
  • Driver side also available
 
£104.00
 

1971-73 Complete Trunk Floor Fastback with Transition Pan

Complete Trunk Floor. 

If when you pop the trunk lid on your 1971-73 Mustang you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor.  Use this complete assembly when there are just too many rust holes to patch up.

This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.

Includes:
  • Trunk floor extensions
  • Trunk Inner Brackets
  • 2 rubber body plugs
 
£1,326.00
 

1971-73 Full Trunk Floor Pan

Full Trunk Floor Pan.

Just like the original this quality reproduction trunk floor has authentic ribbing and stamped impressions.

Covers trunk floor area of 54" x 38".

  • Fits all models
  • Requires use of trunk floor extension patches (available separately)
  • 1 piece floor
 
£397.80
 

1971-73 Inner Trunk Bracket

Inner Trunk Bracket. 

This inner trunk bracket bolts to your tail lamp panel and welds the to trunk floor thus keeping your tail light panel fixed securely.


  • Requires welding
  • Fits all models
  • Steel
  • Fits either side
 
£52.00
 

1971-73 Rear Trunk Corner - LH (Coupe/Convertible)

Rear Trunk Corner - Drivers side.

commonly corroded area of 1971-73. It is the upper rear corner of the trunk and forms the drip groove between the tail lamp panel and the quarter panel.

  • Fits Coupe & Convertible
  • Welding required
  • Passenger side sold separately
 
£147.55
 

1971-73 Rear Trunk Corner - LH (Fastback)

Rear Trunk Corner - Drivers side.

commonly corroded area of 1971-73. It is the upper rear corner of the trunk and forms the drip groove between the tail lamp panel and the quarter panel.

  • Fits Fastback
  • Welding required
  • Passenger side sold separately
 
£147.55
 

1971-73 Rear Trunk Corner - RH (Coupe/Convertible)

Rear Trunk Corner - Passenger side.

commonly corroded area of 1971-73. It is the upper rear corner of the trunk and forms the drip groove between the tail lamp panel and the quarter panel.

  • Fits Coupe & Convertible
  • Welding required
  • Passenger side sold separately
 
£147.55
 

1971-73 Rear Trunk Corner - RH (Fastback)

Rear Trunk Corner - Passenger side.

commonly corroded area of 1971-73. It is the upper rear corner of the trunk and forms the drip groove between the tail lamp panel and the quarter panel.

  • Fits Fastback
  • Welding required
  • Passenger side sold separately
 
£147.55
Displaying 1 to 33 (of 33 products) Result Pages:  1